Home Media Maidstone, Kent are a retail establishment providing quality Hi-Fi, Home Cinema & Custom Installation products. Backed by personal and friendly service.

Rega RB78
The RB78 is a general purpose mono cartridge designed to play most 78 rpm records.
Output: 6.2 - 6.8mV
Stylus: RB78
Fixing: Standard, two screws
Coils: High Spec parallel wound coils
Colour: Black

Rega Bias 2
Output: 6.8 - 7.2mV
Stylus: elliptical
Fixing: standard, two screws
Coils: High Spec parallel wound coils
Colour: Red

Rega Elys 2
Output: 6.8 - 7.2mV
Stylus: elliptical
Fixing: Rega three point fixing
Coils: High Spec parallel wound coils
Colour: Blue

Rega Exact
Output: 6.8 - 7.2mV
Stylus: Vital. Complex fine line micro-ground from a rectangular diamond billet.
Fixing: Rega three point fixing
Coils: High Spec parallel wound coils
Colour: Yellow

Rega Drive Belt - Black

Rega limited edition white drive belt. Rega claim the belt is made to the tightest tolerance and guarantee improved drive to the motor.

Rega Metal Arm Spacers.
Arm Height Adjustment spacers for RB250, RB300, RB700 and RB1000 (Available sizes are 2mm or 4mm Spacers). Click here for further information.

Rega 3 Point Plastic Arm Spacer (to fit RB100, RB251 & RB301).

Rega 3 Point Metal Arm Spacer (to fit RB700 & RB1000).

Rega 45 RPM Adaptor. Click picture to view larger image.

Rega Turntable Mat - To fit P1/P2

Rega Turntable Mat - To fit P9

Black or White colour

Rega Turntable Mat - To fit P2/P3/P5/P7
Made from 100% wool and are 2mm thick.

Price £10.00 inc P&P
(Black)

Price £12.00 inc P&P
(Coloured)

Rega Complete packaging set
to fit P1/RP1/P2

Rega Complete packaging set
to fit P3/24

Rega Complete packaging set
to fit P5

Rega Complete packaging set
to fit P7

Rega Complete packaging set
to fit P9 including PSU

Rega Turntable Lid
to fit P1 & P2

Rega Turntable Lid
to fit P3/P5/P7/P9

Rega Hinge Set (to fit P2 & P3).

Existing hinges are held in place with rivots. The new hinge set requires 4 fixing screws to fit new hinges to the plinth of your Rega turntable.

Rega Turntable Wall Support.

The new Rega 24v Motor Upgrade Kit consists of a low noise, low vibration 24v motor designed and developed to compliment the Rega 24 volt turntables. Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24 volt technology. Designed to fit the following turntables; Rega RP1, Rega P1, Rega P2, Rega P2 2000, Rega Planet, Rega Planar 2, Rega Planar 3, Rega P3 2000 and Rega Planar 25.

Rega Planar 2 Upgrade Kit. No electronic trimming required. Minimises vibration of the motor. Rigidly mounted. Rega's precision craftsmanship. Fantastic sound improvement over and above your existing Planar 2.

Price £82.00 plus P&P

Rega P3 Plinth only - Standard Black finish as fitted to the P3 -24.

Please note that you will require a TT PSU Power Supply for older models. Removal of the power switch is also necessary.

Price £72.00 plus P&P

Price is for the Plinth only and does not include Arm, Cartridge, Mat or Platter!

Rega P3 Plinth - Coloured plinth as fitted to the P3 -24.

Please note that you will require a TT PSU Power Supply for older models. Removal of the power switch is also necessary.

Price £142.00 plus P&P

Rega P3 Plinth - Coloured plinth as fitted to the P3 -24.

Please note that you will require a TT PSU Power Supply for older models. Removal of the power switch is also necessary.

Price £142.00 plus P&P

Rega P3 Plinth - Coloured plinth as fitted to the P3 -24.

Please note that you will require a TT PSU Power Supply for older models. Removal of the power switch is also necessary.

Price £142.00 plus P&P